TechniSat 100Hz Television sets Colani-TV Classic Line - Manual (Page 14)

Settings
13
➜ Use the Programme keys to mark the menu item
Mode.
➜ Use the Volume keys to select STEREO, MONO
A or MONO B, then press the OK key to store in
memory.
Satellite channels broadcast with varying gain
(contrast). In order to avoid distortions in the
white areas of any picture, the contrast must
be adjusted.
Hint: Amplification 1 refers to high contrast, and
should be set, e.g., for the Astra satellite.
➜ Use the Programme keys to mark the menu item
Amplification.
➜ Use the Volume keys to select Amplification 1 or
2, then press the OK key to store in memory.
➜ Use the Programme keys to mark the menu item
Decoder Mode.
➜ Use the Volume keys to select Decoder Mode
FBAS or BB, then press the OK key to store in
memory.
Most decoders, such as Premiere, require the
FBAS setting.
In order to receive scrambled programmes, a
decoder may be connected to the SCART1
socket.
In this case, the following adjustment is requi-
red:
➜ Use the Programme keys to mark the menu item
Decoder EC1.
➜Use the Volume keys to enable the Decoder EC1,
then press the OK key to store in memory.
For free-to-air channels (not encoded), Decoder EC1
must be set to OFF.
When you select the radio mode, your TV set
is transformed into a high-quality radio recei-
ver for analogue satellite radio programmes
or for ADR. In order to save energy, and to
conserve the picture tube, the RADIO/TV key
can be switched on for listening to the radio
in radio mode.
➜ Use the Programme keys to mark the menu item
Radio Mode.
➜ Use the Volume keys to switch the radio mode on
or off, then press the OK key to store in memory.
The Tele Text language setting selects the set
of symbols available for tele text. The default
setting made at the factory is WEST. Should
you encounter problems with foreign chan-
nels (e.g. some letters are not displayed cor-
rectly), you can use this item to make correc-
tions.
➜ Use the Programme keys to mark the menu item
VT Language
➜ Use the Volume keys to select VT languages
WEST, EAST or WEST+TR, then press the OK
key to store in memory.
WEST Western Europe, including Germany
EAST Eastern Europe
WEST+TR Western Europe plus Turkey
➜ Use the RADIO/TV key to return to the TV picture,
or press the MENU key to return to the menu
Programmes Settings.
Mode Radio Mode
Amplification (Contrast)
Tele Text Language
Decoder Mode
Decoder EC1