Tascam DS-M7.1 - Manual (Page 7)

1 – About the unit
TASCAM DS-M7.1
7
Using the front panel as a remote control
unit
When you use the front panel as a remote con-
trol unit, you have the choice of using either the front
or rear 9-pin D-sub connector. If the DS-M7.1 is to
be installed in a machine room some distance from
the mixing location, we suggest using the rear con-
nector, where the cable may be routed more conve-
niently.
Follow the instructions given here (“Making up a
remote control cable” on page 38) when making up a
cable for use with the remote control. If you do not
follow these instructions, there is a risk of incorrect
operation, or even damage to the unit.