Saving multi-effect settings, Single effect, Saving single effects – Tascam 2488MKII User Manual

Page 42: 6 − effects

TASCAM 2488MKII

6 − Effects

Saving multi-effect settings

You can save an edited setting as a user setting in the library.

1 When the MULTI EFFECT screen is visible, press

the

YES/ENTER

key to open the MULTI EFFECT

LIBRARY screen.

2 Use the

cursor keys to select

SAVE

3 Use the

JOG/DATA

dial (or the

cursor keys) to

select a setting slot to store the new setting.

4 Rename the setting if you want (see “Titling” on

page 15).

NOTE

The right column of the list shows the basic effect
types (DIST-FLG, etc.) used in each setting so they will
always be clear regardless of the setting names.

5 Press the

YES/ENTER

key to save the setting and

return to the MULTI EFFECT screen.

NOTE

This overwrites any existing setting in that slot.

Press the

NO/EXIT

key to return to the MULTI EFFECT

screen without saving.

Saving single effects

As with mic effects and multi-effects, single effect settings
can be saved as user settings in the library.

1 With the SINGLE EFFECT screen open, press the

YES/ENTER

key to open the SINGLE EFFECT

LIBRARY screen.

2 Use the

cursor keys and select

SAVE

3 Use the

JOG/DATA

dial or the

cursor keys to

select a slot for saving the settings.

4 Add a name if you like (see “Titling” on page 15).

5 Press the

YES/ENTER

key to save the setting and

return to the SINGLE EFFECT screen.

If you press the

NO/EXIT

key, you will return to the

SINGLE EFFECT screen without saving.

The single effect provides you with a quality effect in the
internal effect loop. This is most useful in the mixdown
and mastering stages, but it can be used at any time.

Input channel and track channel signals can be sent to
the single effect. Channel signal send levels and pre/post
selection are set on the EFFECT SEND screen (see

“Effect

send

” on page 32).

The return from this effect is sent to the stereo bus, or to
the bounce sub mix (“Making a bounce mix” on page 58).

Press the

SINGLE EFFECT

key. It lights, and the screen

changes to the SINGLE EFFECT screen:

Press the

YES/ENTER

key to enter the library screen to recall

a preset effect or a user effect or to save the current parameters.

Use the

cursor keys to select the

PRESET

choices, the

USER

settings, or to

SAVE

the current parameters.

Scroll up and down through the list that appears, and press

YES/ENTER

to confirm your choice.

Single effect