Toshiba SATELLITE PRO L300D - Manual (Page 167)

User’s Manual D-3
Wireless LAN
When installing Wireless LAN cards, the channel configuration is managed
as follows:
■ For wireless clients that operate in a Wireless LAN infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel(printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Table Wireless IEEE 802.11 Channels Sets (Revision A)
*1 Factory-set default channels
*2 Refer to the sheet Approved Countries/Regions for use for the
Frequency Range Channel ID 5150-5850 MHz Note
36 5180
40 5200
44 5220
48 5240
52 5260
56 5280
60 5300
64 5320
100 5500 *3
104 5520 *3
108 5540 *3
112 5560 *3
116 5580 *3
120 5600 *3
124 5620 *3
128 5640 *3
132 5660 *3
136 5680 *3
140 5700 *3
149 5745 *3 US only *4
153 5765 *3 US only *4
157 5785 *3 US only *4
161 5805 *3 US only *4