Toshiba 2400 - Manual (Page 112)

112 Learning the Basics
Using Standby
5.375 x 8.375 ver 2.4.0
Using Standby
If you are using the Windows
®
XP Home operating system,
or are using the Windows ® XP Pro operating system and are
not a member of a domain, power off the computer using the
Stand by command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window
2 Click Stand By.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light (
) blinks amber indicating the
machine is in Standby mode.
If you are using the Windows
®
XP Pro operating system and
are a member of a domain, power off the computer using the
Stand by command as follows:
1 Click Start, then Shut down.
The Shut Down window appears.
2 Select Stand by from the drop-down list of options.
3 Click OK.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power