Toshiba 29CZ6DA - Manual (Page 8)

8
To turn TV on/off
1 Press the q power switch on the TV. The q
red power indicator lights up.
2 If no picture appears, it is in the standby mode,
press the f button on the remote control.
Notes
• You can also turn on the TV by pressing
one of the Number buttons (0~9) on the
remote control instead of the f button.
By pressing the number (one digit only)
where the channel you want to watch is
preset, you can turn on the TV and
channel selection at the same time.
• When the remote control is not at hand,
you can turn on the TV by pressing the
a
, -; + or tcs button on the TV.
3 To switch to the standby mode, press the
f button.
4 To turn off the main power, press the q
power switch.
Auto Power Off
The TV will automatically turn itself off after
about 15 minutes if it is tuned to a vacant
channel, TV broadcasts for a day are finished,
or the signal is interrupted for any reason. This
feature does not work in video input mode.
Selecting the channels
• Press the -/-- button to select the input digit
of position number and then press 0~9 to
select the number. (e.g., for 25, press -/-- to
display “--”, then 2 and 5)
25 --
• Press t to select lower position number, s to
select higher ones.
Note
When a TV channel with teletext service is
selected, a black bar with channel indication will
display on the screen for a second. However,
abnormal indication may appear depending on
the received signal. This is not a malfunction of
the TV.
Selecting the menu language
Choose from five different languages (English,
Mandarin, Malay, Vietnamese and Thai), select
to display all on-screen Menus in your language
of choice.
1 Press MENU and then ; -/+ to highlight the
“
SETUP” icon.
2 Press CH s/t to select “LANGUAGE”, then
press ; -/+ to enter to LANGUAGE menu
mode.
3 Press CH s/t and then ; -/+ to select the
desired language.
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
D/K
ENGLISH
LANGUAGE
ENGLISH
MELAYU
MENU SELECT / ADJUST –/+ BACK MENU SELECT / ADJUST –/+ BACK
To display on-screen information
Press CALL/
i to display the position number
or video input mode selected (A1, A2, DVD
or A 3) and the Mono/Stereo/Bilingual*
audio status. To erase the display, press
CALL/
i again.
25
(*Mono/Stereo/Bilingual symbol only appears
on 29CZ5DE and 29CZ6DA model)
The CALL/
i button can also be used to erase
the on-screen menu display.
To activate Blue screen
With the blue screen function ON, the TV screen
will automatically turn blue and the sound will
be muted when no TV signal is received.
1 Press MENU and then ; -/+ to highlight
the “
SETUP” icon.
2 Press CH s/t to select “BLUE SCREEN”,
then press ; -/+ to set ON or OFF.
Position number or
video input mode
Mono/Stereo/Bilingual
audio status*
BASIC OPERATIONS
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:27 AM 8