Tripp Lite NetDirector B060-032-8 - Manual (Page 28)

28
10. Administrator Utility
View Mode
Many OSD functions only operate on the computers that are currently listed (displayed) on the OSD main screen. Use this function to broaden or narrow the
scope of KVM ports that are listed. The submenu choices and their meanings are given in the table below:
Option Description
Personal Check this option to have the OSD display only the KVM ports that have been set as personal.
Accessible Check this option to have the OSD display only the KVM ports to which you have been granted access.
Accessible & Powered Check this option to have the OSD display only the KVM ports to which you have been granted access, and are powered on.
Set Port ID
When a user switches KVM ports from the OSD, a port ID is shown. The table below explains the options you have in how this information is displayed:
Option Description
Tag Mode There are three options for displaying the Port ID: Display the Port Number only (ID), Display the Port Note only (Port
Name) or Display both the Port Number and Port Note (ID + Port Name). The default is ID + Port Name.
ID Position This positions the port ID on the monitor. The default is the Upper Left Corner. The setting ‘Other’ has no functionality at
this time. It is included for possible future functionality.
Display Duration
Display duration determines the length of time that the port ID displays on the screen after a KVM port change. The table below explains the choices:
Option Description
Always On Displays the Port ID at all times.
User Defi ned Specifi es length of display duration (from 1-240 seconds). The default is 3 seconds. Enter a value of zero to disable this
function.
Set Scan
Selects the KVM ports that are viewed under Auto Scan mode and the duration of time that they receive KVM focus.
Option Description
Scan Timer Determines the amount of time spent on each connected computer/server during Auto Scan. Enter a value from 0-240
seconds. The default is 5 seconds. Entering zero will cause the B060-032-8 to automatically enter Skip mode when Auto
Scan mode is invoked.
Scan Mode Selects which computers will be accessed when Auto Scanning. Personal; only those KVM ports that the user has set as
personal. Accessible; only those KVM ports that the user has been given access to. Accessible & Powered; only those
KVM ports that the user has been given access to and that are powered on. The default is Accessible & Powered.