Toshiba PORTABLE PERSONAL COMPUTER L505 - Manual (Page 127)

User’s Manual 8-11
L500/L505/L500D/L505D
Disconnecting an eSATA device
When you have finished using an eSATA device, you can follow the
procedures below in order to disconnect it:
1. Wait for the indicator light of an eSATA device to go out to make sure all
activity has stopped.
2. Click the Safely Remove Hardware icon on the Windows Taskbar.
3. Click the eSATA device that you want to remove.
4. Carefully pull the eSATA device’s connector out from the computer’s
eSATA/USB combo port.
External monitor
An external analog monitor can be connected to the computer’s external
monitor port. In order to connect a monitor, follow the steps as detailed
below:
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side of the connector as required.
Figure 8-7 Connecting the monitor cable to the external monitor port
3. Turn the external monitor’s power on.
4. Turn the computer’s power on.
If you disconnect an eSATA device or turn off the power while the
computer is accessing the drive you may lose data or damage an eSATA
device or the drive.
Some models are equipped with an external monitor port.