Tekkeon MP1500 User Manual
Page 9
7
USER GUIDE
2. Plug the USB plug on the input/output cord into the USB port on the end of
myPower GO.
3. Connect the adapter plug into the power jack on your portable device.
4. Turn on the portable device and use it as you would normally. While connected,
myPower GO will power or charge your device.
or
Leave the portable device turned off and myPower GO will charge the device
battery.
5. When finished, unplug the power output cord from myPower GO and your
device.
mp1500_ug_revC_fnl 3/12/07 3:34 PM Page 7