Tekkeon MP1500 User Manual

Page 10

Charging Batteries

1. With four rechargeable AA batteries installed in myPower GO, plug the adapter

with the black tip into the input/output cord.

2. Plug the adapter tip into the DC IN jack on the end of myPower GO.

3. Plug the USB plug on the opposite end of the input/output cord into a USB jack

on a computer. The green LEDs will light in sequence to indicate that the batteries
are being charged.

4. After 6 hours, unplug myPower GO. The batteries will be fully charged.

NOTE: It is strongly recommended to recharge the batteries only when completely
empty.

mp1500_ug_revC_fnl 3/12/07 3:34 PM Page 8