Tandberg Data N3 - Manual (Page 49)

43
xfeedback list
To register a feedback expression, type
xfeedback register
To deregister the feedback expression with index , type
xfeedback deregister
To deregister all feedback expressions, type
xfeedback deregister 0
Feedback commands Description
xFeedback Register Status/ Registers for feedback on changes in the chosen
Status, e.g.:
xFeedback Register Status/Calls
To register for all Status changes, use:
xFeedback Register Status
xFeedback Register History/ Registers for feedback on History, e.g.:
xFeedback Register History/Calls
To register for all History, use:
xFeedback Register History
xFeeedback Register Event/Connected/ Disconnected/ ConnectionFailure/
Registration/ Unregistration/ Bandwidth> Registers for feedback on the occurrence of the
chosen Event, e.g.:
xFeedback Register Event/CallAttempt
To register for all available Events, use:
xFeedback Register Event
5.6 Other commands
Command Usage Description
About about Shows information about the system.
clear clear [eventlog/history] Clears the event log or history of all calls and registrations.
eventlog eventlog [n/all] [level] Lists the eventlog with trace information.
n is the number of lines from end of event log to dump
all
–
dumps the whole event log
level
–
sets the level of detail to dump (fatal, error, warning,
info, detail). Defaults to error level if not present.
If no parameters are provided, the whole event log will be
dumped.