TOA Electronics 9000 Series - Manual (Page 5)

Page 5 of 24
5. CONTROL COMMAND AND SETTING VALUE
5.1. Channel Fader Gain
5.1.1. Channel Fader Gain - Position setting
Set the input and output channel fader gains to a fixed value position.
Note: Command cannot be received during power off.
9000Series Amplifier responds with the same data as that received.
91H, 03H, , ,
00H: Input channel
01H: Output channel
00H - 07H (Input channel 1 - 8)
00H - 07H (Output channel 1 - 8)
Position setting
00 – 7EH (-
∞
to +10 dB)
See Channel Fader Gain - Position V/S Gain Table on the next page.
Example: Setting the fader gain of channel 1 to 0 dB
91H, 03H, 00H, 00H, 6AH