TOA Electronics 9000 Series - Manual (Page 19)

Page 19 of 24
5.10. Input Sensitivity Setting
Performs input sensitivity setting of Input channel. 9000Series Amplifier responds with the
same data as that received. Input sensitivity setting is enabled only for the channel on
which the D-001T or AN-001T is used.
Note: Command cannot be received during power off.
ACH, 02H, ,
00H - 07H (Input channel 1 - 8)
INPUT SENSITIVITY TABLE
Value Value
HEX DEC
Sense
(dB) HEX DEC
Sense
(dB)
00H 0 -10 05H 5 -42
01H 1 -18 06H 6 -48
02H 2 -24 07H 7 -54
03H 3 -30 08H 8 -60
04H 4 -36
Example: Setting the input sensitivity of Input Channel 5 to –24 dB.
ACH, 02H, 04H, 02H
5.11. Phantom Power ON/OFF Setting
Sets the phantom power of Input channel to ON or OFF. 9000Series Amplifier responds
with the same data as that received.
Note: Command cannot be received during power off.
87H, 02H, ,
00H - 07H (Input channel 1 - 8)
00H: PHANTOM OFF
01H: PHANTOM ON
Example: Setting the phantom power of Input Channel 1 to ON.
87H, 02H, 00H, 01H