Tannoy POWER VS15 BP - Manual (Page 5)

Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
POWERVS15 BP
Tannoy adopts a policy of continuous improvement and product specification is subject to change POWERVS15 BP data file // Issue: 1.06 // 15.01.08
OPTIONAL ACCESSORIES & MOUNTING OPTIONS
VEB VTH
8001 2820 VEB - 1
8001 2860 VTH Black 1
8001 2870 VTH White 1
PACKED QUANTITY PART NUMBER COLOUR MODEL NAME
Ordering Information
The bass loudspeaker shall be of the bandpass type consisting of one 380mm (15.00”) long excursion low frequency transducer mounted on an
internal baffle and driven by an integrated single channel (bridged) Class D amplifier with user selectable low pass filter.
The optimally tuned 100 litre enclosure shall be of 15mm (0.62”) birch plywood construction finished in a wear resistant, textured black paint. There
shall be eight M10 rigging points and a blanking plate for the installation of a pole mount socket.
Performance of the subwoofer shall meet or exceed the following criteria: Frequency response measured at 1 metre on axis with swept sine wave
shall be 47Hz to 80Hz (-3dB) with low pass filt A switched on and 47Hz to 110Hz (-3dB) with low pass filt B switched on. Rated average SPL shall
be 124dB (anechoic) on axis at 1 metre. Connectors shall be 1 x female XLR (input), 1 x male XLR (link) and 1 x Neutrik Powercon. The speaker
shall be fitted with the following controls and indicators: level control, blue power LED, green signal LED, red limit LED, user selectable LPF and
a power switch.
The enclosure shall not exceed the following dimensions: 665 x 440 x 440mm or 26.18 x 17.32 x 17.32” (H x W x D)
The Tannoy subwoofer loudspeaker system shall be… POWERVS15 BP
Architectural specifications