beautypg.com

TRENDnet TEW-603PI User Manual

Page 32

background image

32

C

ONFIGURING

802.1X

You need to know if your access point supports 802.1X and then apply the configuration here.


1. Choose the EAP method under Authentication protocol.

2. Options

for

User Information depend on the EAP method chosen.


C

ONFIGURING

802.1X

–

PEAP

Refer to the following to configure PEAP.

1. At

WPA security mode, click Configure button next to Authentication Protocol.

2. Select

Inner PEAP protocol.

3. Click

Save to finish and return to the previous screen.

4. Type in a unique User ID and Password under User Information.

5. If your network uses a user server certificate click Configure Certificate (see Note below).

The following window appears:

See also other documents in the category TRENDnet Hardware: