Topcon GTS-823A - Manual (Page 91)

7-2
7 COMMUNICATION MODES
7.2 Data File In
When transferring data files from a PC to the GTS-820A Series, the file received into the main directory.
Data files CANNOT be received into a subdirectory. Data files CANNOT be transferred to the card
memory. Files can only be transferred to the internal memory and then copied onto the card.
7.3 Data File Out
Transferring a file from the GTS-820A internal memory or card memory to the PC is also possible.
Operating procedure Operation Display
Make sure the instrument is ready and
waiting for the data file before you command
the PC to send the file.
1 Press [F2](Data file in) key.
2 Command the PC to send the file at this time.
File name, amount of received data (Byte) /
Capacity of the file (Byte) and percentage of
proceeding will be displayed.
When the transfer is complete, the display will
return to the main menu icons.
[F2]
Operating procedure Operation Display
Make sure the PC is ready and waiting before
the GTS-820 sends the file.
1 Press [F3](Data file out) key.
[F3]
2 Press [F1](Internal memory) or [F2](Card
memory) key and press [ENT] key.
Example: Internal memory
[F1] to[F2]
[ENT]
3 Select a file by pressing [F5]( ↑ ) or [F6]( ↓ ) key
and press [ENT] key.
File name, amount of sent data(Byte) /
Capacity of the file (Byte) and percentage of
proceeding will be displayed.
When the transfer is complete, the display will
returns to the file menu.
Select
a file
[ENT]
Communication
F1 Protocol
F2 Data file in
F3 Data file out
Data file in
[TOPCON .DAT]
0/ 8676 (0%)
Communication
F1 Protocol
F2 Data file in
F3 Data file out
Data file out
F1 Internal memory
F2 Card memory
JIS .DAT 1597 12-25
TOPCON .DAT 1089 10-05
FC7 .TXT 2450 09-11
HILL .DAT 31777 08-19
Data file out
↑ ↓
Data file out
[TOPCON .DAT]
0/ 1089 (0%)