Trango Broadband 5010 - Manual (Page 31)

SNMP Atlas SNMP Support
Trango Broadband Wireless — Atlas5010 page 31
Chapter 5 SNMP
Atlas SNMP Support
The Atlas supports SNMP (Simple Network Management Protocol). Network management consists of the following 3
categories: configuration, Link and Association monitoring and Alarms. Besides this proprietary Management
Information Base (MIB) the Atlas also supports a large part of the MIB-II OIDs.
Review the Trango MIB (TRANGO-P5M-MIB.mib) available on our website for the complete listing of all MIB objects
available.
These capabilities allow the system administrator to provide superior service through higher network accessibility and
integrated performance monitoring.
Depending on your Network Node Manager (NNM) it may be necessary to append a “.0” onto the end of each of the
OIDs listed below for proper operation.
Objects for Configuration Name Description
1.3.6.1.4.1.5454.1.40.1.1.1 verUnitType Returns radios unit type
(0 = RU, 1= MU)
1.3.6.1.4.1.5454.1.40.1.8.3 sysswAutoScanMUSignal Returns value of Auto Scan switch
(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.3 sysDefaultOpmode Returns defaultOpmode setting
(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.4 sysCurrentOpmode Returns current opmode setting
(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.5 sysActivateOpmode Turns opmode on
1.3.6.1.4.1.5454.1.40.1.13.1 sysipconfigIpAddress Sets IP address
1.3.6.1.4.1.5454.1.40.1.13.2 sysipconfigSubnet Sets subnet
1.3.6.1.4.1.5454.1.40.1.13.3 sysipconfigDefaultGateway Set default gateway
1.3.6.1.4.1.5454.1.40.1.13.4 sysipconfigChange Activates IP address change
1.3.6.1.4.1.5454.1.40.2.1 rfPeerDeviceID Configure PeerID
1.3.6.1.4.1.5454.1.40.2.2 rfActiveChannel Displays current channel
1.3.6.1.4.1.5454.1.40.2.3 rfActivePolarization Displays current antenna polarization
1.3.6.1.4.1.5454.1.40.2.4 rfSpeed Displays current Speed setting
1.3.6.1.4.1.5454.1.40.2.5 rfTxPower Displays current transmit power (dBm)
1.3.6.1.4.1.5454.1.40.1.14 sysRemarks Display radios remarks
Objects for Link and Association Monitoring
1.3.6.1.4.1.5454.1.40.2.12 rfRSSI Displays RSSI value (dBm)
1.3.6.1.4.1.5454.1.40.2.13 rfAssociated Displays current association status
(0 = disassociated,1 = associated)
1.3.6.1.4.1.5454.1.40.3.2 ruReboot Reboots RU
1.3.6.1.4.1.5454.1.40.3.3 ruDistance Displays current ru distance
Objects for Bandwidth Monitoring
1.3.6.1.4.1.5454.1.40.1.9.1 systrafficEthInOctets Displays Ethernet in (bytes)
1.3.6.1.4.1.5454.1.40.1.9.2 systrafficEthOutOctets Displays Ethernet out (bytes)
1.3.6.1.4.1.5454.1.40.1.9.3 systrafficRfInOctets Displays RF in (bytes)
1.3.6.1.4.1.5454.1.40.1.9.4 systrafficRfOutOctets Displays RF out (bytes)
Objects for Alarm Monitoring
1.3.6.1.4.1.5454.1.40.3.4.1.1 trapTrapDstEntry
1.3.6.1.4.1.5454.1.40.3.4.1.2 trapTrapDstEnabling
Enable/Disable trap
1.3.6.1.4.1.5454.1.40.3.4.2 trapTrapIpAddress Set destination trap IP
1.3.6.1.4.1.5454.1.40.3.4.3
trapTrapCommStr Set trap community string