Toshiba TDP-TW90 - Manual (Page 11)

21 20
Preparations
p.71
Before connection
• Read the owner’s manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal p.69 , etc.
• Turn off the power of both devices before connecting.
• The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Notes
• COMPUTER terminals 1 and 2 function identically.
• The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.
Connection
■ Removing a PC card
q Look at CARD indicator.
If it is off, proceed to step r .
w Press the UNMOUNT button.
Begins processing for PC card removal.
e Wait until CARD indicator goes
out.
Never remove the PC card while lit.
Doing so could damage the PC card or
corrupt your data.
r Press the Eject button.
The Eject button is a bit stiff, so
press firmly while supporting the
projector. Be careful to avoid injury
when doing so.
■ Mounting a PC card
q Insert the PC card.
After making sure of the card orienta-
tion, press it in firmly until it stops.
When the PC card is detected correctly,
the CARD indicator comes on in green.
How to use the PC card slot
The wireless LAN PC card enables you to connect the projector wirelessly with a personal
computer that supports IEEE802.11b based wireless LAN.
p.34 (Please note that commu-
nication between all the computers based on IEEE802.11b and this projector is not
guaranteed.) You can also use a commercially available memory card to project JPEG
image files using this projector.
p.42 Please follow the steps below when removing or
mounting a PC card.
PC Card
CARD indicator
UNMOUNT button
Eject button
■ If CARD indicator turns red
Press the RESET switch with a thin pin
or similar implement (it is at the bottom
of a recess).
RESET switch
CARD indicator
Computer (for control)
VCR
Video recorder,
DVD player, etc.
Audio amplifier, etc.
To
RS-232C
terminal
Control cable
To audio output
White (L)/Red (R) To video
output
AV cable
(not supplied)
Video cable
(not supplied)
To S-Video
output To audio output
White (L)/Red (R)
S-Video cable
(not supplied)
Audio cable (not supplied)
To audio input
White (L)/Red (R)
To RGB
output
RGB cable
(not supplied)
Audio cable
(not supplied)
To audio
output
To Y/C B /C R output
Green (Y)/Blue (C B )/Red (C R )
Conversion adapter BNC-pin
(not supplied)
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
To audio output
Audio cable
(not supplied)
RGB cable
(supplied)
To RGB
output
Computer Computer DVD video recorder, etc.