Toshiba 27WL56 Series - Manual (Page 9)

9
Tuning the television using Quick Setup,
Programme sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 5.
1
2
3
5
6
7
8
9
4
Connect the television to the mains power. The
Quick Setup
screen will appear.
Using
S or R select your language, then press
OK .
Then press
S or R to select your country and
press OK.
Your System will have been selected, if there is a
choice, press R to select from the systems
displayed.
To start Auto tuning press OK.
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed using
Programme sorting
which will appear on the
screen.
B/G – Continental Europe, I – UK
D/K – Eastern Europe, L1, L2 – France
Use Q or P to move through the list to your
preferred position. As you do so the other stations
will move to make room.
Press
S to store your move.
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media
recorder/decoder with a SCART lead or if a
station on another system is required, use
Manual tuning
to allocate a programme
position, see page 10.
With the list of stations now showing use Q or P
to highlight the station you want to move and
press
R .
The selected station will be moved to the right of
the screen.
Quick Setup
Select your language.
Language English
EXIT Watch TV OK Next
Auto tuning
Searching
Channel : 3 Station :
EXIT Stop
Programme sorting
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C69
6 C69
Sort Store
MENU Back EXIT Watch TV