Toshiba 27WL56 Series - Manual (Page 16)

FUNCTION
Teletext Auto.
Panel lock Off
Auto format On
Grey screen On
Side Panel 1
MENU Back EXIT Watch TV
16
Picture controls
continued
In the Picture settings menu press Q until
Colour Temperature
is highlighted.
Press
S or R to select between Normal, Warm
and Cool to suit your preference.
1
2
Colour Temperature increases the ‘warmth’ or ‘coolness’
of a picture by increasing the red or blue tint.
Colour temperature
In the Picture menu press Q to select Cinema
mode
.
Press
S or R to select On or Off.
1
2
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
Cinema mode
Automatic format (Widescreen)
When this television receives a true Widescreen picture and
Auto format is On, it will automatically be displayed in
Widescreen format, irrespective of the
television’s previous setting.
Press MENU and
S or R to select the
FUNCTION menu.
1
Press Q to highlight Auto format, then
S or R
to select On or Off.
2
DNR enables you to ‘soften’ the screen representation of a
weak signal to reduce the noise effect.
DNR – Digital Noise Reduction
Select DNR from the Picture settings menu. Use
S or R to adjust. The differences may not always
be noticeable (for the best result use lower settings
as picture quality can be lost if the setting is too
high).
1
When watching a DVD the compression may cause some
words or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.
MPEG NR – Noise Reduction
Select MPEG NR from the Picture settings
menu. Use
S or R to select a setting to suit your
preference.
1
Black Stretch increases the strength of dark areas of the
picture which improves the definition.
Black stretch
Press
S or R to select between On and Off. The
effect depends on the broadcast and is most
noticeable on dark colours.
1
2
Picture settings
Black stretch On
MPEG NR Off
DNR Auto.
Colour Temperature Normal
MENU Back EXIT Watch TV
2/2
In the Picture settings menu press Q until Black
Stretch
is highlighted.