Toshiba 27WL56 Series - Manual (Page 12)

12
Auto tune, general controls, time display,
stereo/bilingual transmissions
Using Auto tuning
1
2
3
4
To set up the television using Auto tuning, press
MENU
and use
S or R to select the SET UP menu.
You must allow the television to complete the search.
When the search is complete the television will
automatically select programme position 1. This may not
be a clear picture, so the station order can be changed
using Programme sorting, see page 9.
B/G – Continental Europe, I – UK
D/K – Eastern Europe, L1, L2 – France
5 Your System will have been selected, if there is a
choice, press
S or R to select from the systems
displayed, then press OK.
To select a programme position use the numbered
buttons on the remote control.
For programme positions below 10 use 0 and the
required number e.g. 01 for programme position 1.
Programme positions can also be selected using P f (P)
and P e (Q).
To revert to the previous programme position press
^ ^
.
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press CALL.
Selecting programme positions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Press O I/II to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
O I/II to select Dual 1, Dual 2 or Mono.
Stereo and Bilingual transmissions
The time display facility allows the current (text service)
time to be seen on the television screen.
Press 8 / 9 whilst watching a normal television
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
The Time Display
Press Q to highlight Language and
S or R to
select.
Using Q highlight Country, then
Sor R to select.
The television will now tune the stations for your
country.
Press Q to highlight Auto tuning, then press OK.
SET UP
Language English
Country UK
Auto tuning OK
Manual tuning OK
Programme sorting OK
AV connection OK
MENU Back EXIT Watch TV
1/2
Auto tuning
Previous settings will be lost !
Press EXIT for no change.
Press OK to start Auto tune.
MENU Back EXIT Watch TV
!