Toshiba SD-6915SU - Manual (Page 24)

ENG-24
SACD Playback DVD AUDIO Playback
CD Layer Play Function
At SACD disc stop mode, press the SETUP button
and select the SACD/CD in Function by using
LEFT/RIGHT/UP/DOWN and then press the ENTER
button. You can playback CD layer in SACD disc.
(Refer to the page 16 to setting CD playback Func-
tion).
Note
• Some SACD discs do not include a CD layer.
• Depending on a disc, this function may not work.
CD
Time
01
0 : 0 0 : 1 3
Track
To access the desired Track when there
is more than one in the disc.
Allows playback from a desired time.
You must enter the starting time as a
reference.
Track
Time
1. Open the disc tray.
2. Place the DVD AUDIO disc on the tray.
- Place the DVD AUDIO disc with the labeled side up.
3. Close the tray.
- The tray closes and disc plays.
Using the Display Function
1. During play, press the DISPLAY button on the
remote.
2. Use the UP/DOWN buttons to select the desired
item.
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a Group, Track, Page
or to start the playback from the desired time.
4. To make the screen disappear, press the
DISPLAY button again.
Note
Some DVD-AUDIO discs don’t audio down-mixing.
These discs always output 5.1ch analog audio
regardless of audio setup.
DVD AUDIO
Time
01
0 1
0 : 0 0 : 1 3
01 Track
Page
Group