Controls, Keypanel controls – Telex Firefly P200 User Manual
Page 19
CONTROLS
The P200/P250 keypanel and Menu Mode On-Screen controls allow you
to customize the projected image and enhance the appearance of your
presentation. The function of each keypanel and on-screen control is
described below and the keypanel is shown in Figure 11.
Keypanel Controls
NOTE: All controls have on-screen graphics to indicate their relative
value or selection setting.
BRIGHTNESS
Press the upper (+) button of the
BRIGHTNESS
control to increase the
overall image brightness. Press the lower (-) button of the
BRIGHTNESS
control to decrease the overall image brightness. When
either adjustment limit is reached, the on-screen indicator will stop
moving.
CONTRAST
Press the upper (+) button of the
CONTRAST
control to make the color
image more vivid. Press the lower (-) button of the
CONTRAST
control
to provide greater definition to the color image in the subtle shading
areas. When either adjustment limit is reached, the on-screen indicator
will stop moving.
VOLUME
Press the upper (+) button of the
VOLUME
control to increase the
volume of the built-in speakers, or increase the level at the
AUDIO OUT
jack. Press the lower (-) button of the
VOLUME
control to decrease the
volume of the built-in speakers, or decrease the level at the
AUDIO OUT
jack. When either adjustment limit is reached, the currently active
on-screen indicator will stop moving.
Alignment
Press
2
(left),
4
(right),
5
(up), or
3
(down) to move the image left,
right, up, or down. (There is no adjustment limit for the alignment
function; the image will continue moving and wrap around to the opposite
edge of the display.)
POWER
R
E
P
L
A
C
E
L
A
M
P
SOURCE
MENU/RESET
F2
F1
VOLUME
CONTRAST
BRIGHTNESS
+
+
+
-
-
-
Figure 11. Firefly
™
P200/P250 Keypanel
☞
14 User Manual