Philips 15LCD35 - Manual (Page 6)

0/9 Digit buttons
To select a TV channel.
0 Previous program
To display the previously
selected TV channel.
MENU Press repeatedly to
display each menu.
OK Press this key to activate
your choice, when in the menus.
Use of the remote control
5
Use of the remote control
B
MENU OK
CH
V ¬
5
1 3 2
4 6
7 9 8
0 0 CC
EXT SLEEP
EXT Source
Select your computer or other
peripherals: press repeatedly to
select
TV , VIDEO, S-VIDEO,
COMPONENT or PC monitor
mode, according to where you
connected your external
source. See p. 12.
•
VIDEO for a VCR connected
to the AV connectors of the
TV.
• S-VIDEO for a S-Video VCR
connected to the S-VIDEO
connector of the TV.
• COMPONENT for a
DVD/DTV Set Top box or
another component video
device connected to
Y , Pb ,
Pr (480i) and to the AV
AUDIO inputs L and R .
• PC for a personal computer
connected to the PC INPUT
connector of the TV.
Note: When a VCR is connected
via the aerial socket, the TV is
used in TV mode. Alternatively, you
can select the tv, video, s-video,
component or pc monitor mode
with the
EXT button on the
remote control.
B
Standby
Press to turn on/off the TV.
The TV is never completely
powered off unless it is
physically unplugged.
V Volume
Press + or - to adjust the
volume.
¬ Mute
Temporarily interrupt the
sound or restore it.
The captions automatically
appear if the watched TV
program provides
CC info and
EZ-mute has been selected as
Closed Caption (see p. 9).
CH Channel selection
To browse through the TV
channels which are not erased.
To view a blocked channel, use
the digit buttons to access the
channel and enter your access
code.
SLEEP Sleeptimer
With this key you can set a
time period after which the TV
should switch itself to standby.
Press the key repeatedly to
select the number of minutes.
The counter runs from ..., 10,
20, 30... to 240 minutes.The
timer begins to count down
from the number of minutes
selected after the display has
disappeared.
Note: To view the remaining time,
press the
SLEEP button once. To
cancel the sleep time, repeatedly
press the
SLEEP button until ...
appears.
If you turn the TV off after setting
the sleep time, the setting will be
erased. Set it again.
CC Closed Caption
Press this button to turn
Closed Caption on.
Be sure you have selected
Caption On in the Setup
menu. See p. 9.
268E(15") en 1997/04/03 9:24 AM Page 5