Philips 15LCD35 - Manual (Page 19)

Glossary
Audio/Video Inputs
Located on the rear and the front of the
receiver these connectors (RCA phono type
plug) are used for the input of audio and video
signals. Designed for use with VCRs (or other
accessories) in order to receive higher picture
resolution and offer sound connection options.
Menu
An on-screen listing of feature controls shown
on the TV screen that are made available for
user adjustments.
MPAA
Motion Picture Association of America
Mulichannel Television sound (MTS)
The broadcast standard that allows for stereo
sound to be transmitted with the TV picture.
Programming
The procedure of adding or deleting channel
numbers into the TV’s memory.
In this way the TV ‘remembers’ only the locally
available or desired channel numbers and skips
over any unwanted channel numbers.
RF
Radio Frequency or modulated signal design
used as the carrier for television broadcasts.
Second Audio Program (SAP)
Another or additional audio channel provided
for in the Multichannel Television Sound (MTS)
broadcast standard. A monaural soundtrack
included within the recorded or video signal
(usually containing a second language translation
for the displayed program).
Sleep Timer
Function with which you can set a time period
after which the TV should turn itself off.
S-Video Input
Allows direct connection of high-resolution
video sources, such as a Super VHS
videocassette recorder, Laser Disc player, etc.
Provides improved picture resolution, sharpness,
and clarity.
18
Glossary
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and the TV.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio or
television technician for help. Modifications -
The FCC requires the user to be notified that any
changes or modifications made to this device that
are not expressly approved by Philips Consumer
Electronics may void the user’s authority to
operate the equipment.
Cables -
Connections to this device must be made with
shielded cables with metallic RFI/EMI connector
hoods to maintain compliance with FCC Rules and
Regulations.
Canadian notice -
This Class B digital apparatus meets all
requirements of the Canadian Interference-Causing
Equipment Regulations.
Avis Canadien -
Cet appareil numérique de la classe B respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Regulatory Notices - Federal Communications Commission Notice
268E(15") en 1997/04/03 9:24 AM Page 18