Philips 15LCD35 - Manual (Page 13)

12
Connect Peripheral Equipment
Connect Peripheral Equipment
Preparation
Remove the backplate at the back of the TV as
shown on the illustration opposite.
Lay the LCD TV with the screen down on a
table as it will be easier to connect your
peripheral equipment. Please take your
precautions not to damage the screen.
If you are using only mono equipment,
connect only the
VIDEO and the AUDIO L
(Mono) ports.
If your VCR has an S-VHS video jack:
For improved picture quality, connect a
S-Video cable with the
S-VIDEO input on
the TV instead of connecting the VCR to
the
VIDEO port of AV .
S-Video does not provide audio, so audio
cables must still be connected to provide
sound.
Watching VCR
&
If you use connection 2, select the TV
channel 3 or 4.
é
If you use connection 3, select VIDEO or
S-VIDEO in the Input menu item of the
setup menu, see p. 6.
“
Insert a video tape in the VCR and press
the
PLAY button.
Video recorder
S-VIDEO
IN
VIDEO (MONO) L
AV
R AUDIO
VCR
CABLE
2
3
x 75
DC 12V ANT IN PC INPUT Y Pb
COMPONENT INPUT (480i)
Pr
1
There is a wide range of video and audio
equipment that can be connected to your TV.
The following connection diagrams show you
how to connect them.
How to connect
&
Connect the supplied antenna cable 1
to the
RF IN port of your VCR.
é
Connect another RF cable 2 from the
output
OUT of your VCR to the x
input of your TV. Better quality when
playing from your VCR can be obtained if
you also connect the Video, Audio Left
and Right (only for stereo equipment)
cables 3 to the
VIDEO , AUDIO L and R
inputs AV .
268E(15") en 1997/04/03 9:24 AM Page 12