beautypg.com

Connect peripheral equipment, Personal computer – Philips 15LCD35 User Manual

Page 16

background image

Monitor Display modes

MODE Resolution

Horizontal

Vertical

Frequency (KHz)

Frequency (Hz)

VGA 640x480

31,5 KHz

60Hz

640x480

35,0 KHz

67Hz

640x480

37,9 KHz

72Hz

640x480

37,5 KHz

75Hz

640x480

43,3 KHz

85Hz

(DOS) 720x400

31,5 KHz

70Hz

SVGA

800x600

35,2 KHz

56Hz

800x600

37,9 KHz

60Hz

800x600

48,1 KHz

72Hz

800x600

46,9 KHz

75Hz

800x600

53,7 KHz

85Hz

(MAC) 832x624

49,7KHz

75Hz

XGA

1024x768

48,4KHz

60Hz

1024x768

56,5KHz

70Hz

1024x768

60,0KHz

75Hz

1024x768

68,7KHz

85Hz

Note:

- If the set is cold, there may be a small "flicker"

when the set is switched on. This is normal, there is
nothing wrong with the set.

- If possible, use the VESA 1,024x768@60Hz video

mode to obtain the best image quality for your
LCD monitor. If used under the other resolutions,
some scaled or processed pictures may appear on
the screen. The TV has been pre-adjusted to the
mode VESA 1,024x768@60Hz.

- Some dot defects may appear on the screen, like

red, green or blue spots. However, this will have no
impact or effect on the monitor performance.

- Do not press the LCD screen with your finger for a

long time as this may incur some afterimages.

Personal computer

S-VIDEO

IN

VIDEO (MONO) L

AV

R

AUDIO

x 75

DC 12V

ANT IN

Y

Pb

COMPONENT INPUT (480i)

Pr

&

Connect one end of a (male to male)
VGA cable to the video card of the
computer and the other end to the VGA
connector

PC INPUT

at the back of the

TV. Fix the connectors firmly with the
screws on the plug.
Note: the VGA cable is not supplied with the
TV.

é

In case of a Multimedia computer, connect
the audio cables to the audio outputs of
your Multimedia computer and to the

AUDIO L

and

R

connectors of the

AV

input of the TV.

Press the

EXT

button on the remote

control or select

Input

in the setup menu

(See p. 6) to select PC.

Switch on the computer.The TV can be
operated as the computer monitor.

Note: If you have an Apple Macintosh
computer, connect the VGA desktop block from
the 3 row 15 pin to 2 row 15 pin with the
signal cable and connect the VGA desktop
block to the Apple Macintosh computer.

15

Connect peripheral equipment

268E(15") en 1997/04/03 9:24 AM Page 15