Tascam CD-160MK - Manual (Page 14)

1
TASCAM CD-160MKll
3 − Disc operations
1 5
2 3
4
1. Press the POWER switch to turn the unit on.
2. Press the OPEN/CLOSE key.
3. Place a disc on the tray with the printed label face
up.
CAUTION
Never place more than one disc on the tray.
The disc must be loaded centrally into the disc tray.
If the disc is not correctly loaded, it may not be pos-
sible to open the tray again once it has closed, so
you should ensure the disc is always centrally load-
ed in the tray.
Do not force the tray by hand during opening and
closing operations.
4. Press the OPEN/CLOSE key to close the CD door.
It takes a few seconds for the unit to load the disc.
No keys will work during loading. Wait until the
total number of the tracks and the total play time
of the disc are displayed.
When no disc is loaded in the CD player,
NO
DISC
is displayed.
When a CD is loaded:
total tracks total playing time
When a MP3 disc is loaded:
total number of folders
total tracks
5. Press the PLAY/READY key ( Á / π ) to start playback.
Playback starts from the first track of the disc.
When the playback of all the tracks has finished,
the unit stops automatically.
NOTE
MP3 tracks recorded out of folders are automatically
put in the “ROOT” folder, and playback starts from
the first track of the ROOT folder.
Listening to CD/MP3 (1)