T+A Elektroakustik K1 CD-RECEIVER - Manual (Page 42)

42
SAFETY NOTES
Please read through these operating instruc-
tions carefully before you attempt to use your
new equipment. It includes important safety
notes which must be observed!
1.
This unit must be operated in dry condi-
tions. It should be set up well out of reach
of small children.
2.
Protect the unit from drips and splashes of
water; never place flower vases or fluid
containers on the unit. Liquid or foreign
bodies must never be allowed inside the ma-
chine. If a liquid or a foreign body gets in-
side the machine in spite of your best efforts,
immediately disconnect the machine from
the mains supply and take it to an authorised
 specialist workshop for checking.
3.
This machine should never be used with-
out proper supervision. This applies to any
electrical device.
4.
If the machine is not to be used for a long
period disconnect it from the mains supply
at the wall socket.
5.
Liquid or foreign bodies must never be
allowed inside the case. Mains voltage is
present inside the unit, and there is a risk
of lethal electric shock.
6.
The power supply required for this ma-
chine is printed on the mains supply
socket. The unit must never be connected
to a power supply which does not meet
this specification.
7.
Mains leads must be deployed in such a
way that there is no danger of damage to
them (e.g. through persons treading on
them or from furniture).
8.
Take particular care with plugs, distribu-
tion panels and connections at the ampli-
fier. Never exert undue force on mains
connectors.
9.
The unit must be set up in such a way that
none of the connections can be touched di-
rectly (especially by children).
10.
With the exception of the connections and
any other measures described in these in-
structions, no work of any kind may be
carried out on the machine by unqualified
persons.
11.
The machine should only ever be opened
by a qualified specialist technician. Re-
pairs and fuse replacements should be
entrusted to an authorised
 specialist
workshop.
12.
If the unit is damaged, or if you suspect
that it is not functioning correctly, imme-
diately disconnect the mains plug at the
wall socket, and ask an authorised

specialist workshop to check it.
13. Care of the machine
• Always disconnect the unit from the
mains supply before cleaning it.
• The casing surfaces should be cleaned
simply by wiping them with a soft, dry
cloth.
• Never use abrasive or solvent-based
cleaners!
• Before switching the unit on again
check carefully that you have not dis-
turbed any connections, and that no
short-circuits exist at the terminals.