Therma-Stor Products Group HI-E Dry Vehere - Manual (Page 3)

3 www.thermastor.com • [email protected] Toll-Free 1-800-533-7533
2.1 Vehere Diagram
A - Air Intake
B - Humidity Sensor/Control
C - Filters
D - Air Exhaust
E - Fan Switch
F - Power Cord
G - Drain Hose
Figure 1: Vehere diagram.
36.5”
A
C
C B
E
D
G
F
40”
19”
Vehere Pool & Spa
Humidity Controller
Figure 2: Installation clearance requirements
Figure 3: Installation in humid area with no ducting
3 Installation Options
3.1 Location
The Vehere can be installed in a variety of locations to meet
the owner’s needs; other considerations include:
1. Providing access to a 115 VAC power outlet (7’ power cord
is provided).
2. Locating near a floor or other suitable drain (4’ drain hose
included).
3.1A Improper Installation
Do not install the Vehere with the exhaust of the unit within 3’
of a wall or obstruction. Do not place the unit near open water.
(See Fig. 2)
3.1B In Humid Area, No Ducting
The simplest installation is to place the Vehere in the pool area
with no ducting. The Vehere must be at least 3’ from walls and
other air obstructions, at the return and supply sides of the
Vehere. (See Figure 3)