Specifications – TOA Electronics C-CV44-3 NTSC User Manual
Page 15
15
The specifications of this camera are subject to change without notice.
• Accessories
Mounting bracket ................................................................................ 1
Cable with water-resistant cap (2 m) .................................................. 1
Camera mounting bolt ........................................................................ 2
(washer-installed M8 x 14mm stainless steel hex bolt)
Insulation spacer.................................................................................. 2
9. SPECIFICATIONS
C-CV44-3 (NTSC)
C-CV44-3 (PAL)
24 V AC, 50/60 Hz, or 12 V DC
2 W
1/4” IT-CCD
768 (H) x 494 (V), 380,000 pixels
752 (H) x 582 (V), 440,000 pixels
2:1 interlace
15.734 kHz (H), 59.94 Hz (V)
15.625 kHz (H), 50 Hz (V)
VBS1.0 V(p-p), 75
Ω
, RCA pin jack
VBS1.0 V(p-p), 75
Ω
, water-resistant connector
Internal synchronization
H: 480 lines (center), V: 350 lines
H: 470 lines (center), V: 410 lines
48 dB
3 lx (50 IRE)
3 lx (350 mV)
ATW
f=3.0 mm – 6.0 mm
1:1.2 – 1.5
Automatic iris
71.9º– 36º(H), 52º– 26.8º(V)
ON/OFF (for focus adjustment)
Backlight compensation, shutter speed, iris adjustment
1/60,1/100
1/50,1/120
Equivalent to IP66
– 10ºC to + 50ºC
Under 90% RH (no dew condensation)
Front cover,rear cover,sunshade : Aluminum, light gray, paint
Mounting bracket : Stainless steel, light gray, paint
ø92 x 236 (D) mm
1.1 kg
Model No.
Power Source
Power Consumption
Image Device
Number of Effective Pixels
Scanning System
Scanning Frequency
Monitor Output
Video Output
Synchronizing System
Resolution
S/N Ratio
Minimum Illumination
White Balance Mode
Focal Length
Maximum Aperture Ratio
Iris
Angle of View
Control Switch
Other Functions
Shutter Speed
Water Resistance
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight