Top Innovations MCCULLOCH MC1246 - Manual (Page 11)

Top Innovations, Inc.
U
SING THE
P
ORTABLE
P
OWER
S
TEAM
C
LEANER
11
FILLING BOILER WITH WATER
1. Place Portable Power Steam Cleaner on a flat, level surface.
2. Make sure electrical cord is unplugged from outlet.
3. If unit has been in use, press and hold Steam Trigger to ensure that any remaining
steam has been released. Allow approximately 30 minutes for Boiler to cool.
4. Cautiously unscrew Boiler Cap by rotating it in a counter-clockwise direction, and
remove (FIGURE 7-A).
5. Boiler should always be emptied after each use. If it was not emptied after the last use,
empty it now. This will prevent over-filling.
6. Fill included Measuring Cup to 16 oz. (473 ml.) fill line with water.
NOTE: To prolong the lifetime of your Portable Power Steam Cleaner, it is highly
recommended that distilled or de-mineralized water be used in unit.
7. Carefully pour water from Measuring Cup into Boiler through Fill Hole.
WARNING: Extreme caution should be used when pouring water into the Boiler.
Do not look directly down into Fill Hole when filling. Keep your free hand and
any children or pets at a safe distance.
8. If desired, refill Measuring Cup to 16 oz. (473 ml.) fill line with water, and pour into
Boiler.
NOTE: Do not exceed the Boiler’s maximum capacity of 33 oz. (976 ml.)
9. Replace Boiler Cap, rotating it in a clockwise direction and ensuring that it is screwed
on tightly to prevent hot steam from escaping and causing injury (FIGURE 7-B).
FIGURE 7
A B