Introduction, Starting an internet session, Monitoring your internet connection – Technicolor - Thomson SpeedTouch 585 User Manual
Page 39: To pr, 1 speedtouch™ web pages, Chapter 3
31
E-DOC-CTC-20051017-0147 v2.0
Chapter 3
Internet Connectivity Dial-In Clients
3.1 SpeedTouch™ Web Pages
Introduction
As the SpeedTouch™ Web pages are controllable from any Operating System with
an installed Web browser, the method to establish PPP sessions described later, can
be used on any computer system.
For more information on Internet connection setup, refer to the provided
Installation and Setup Guide.
Starting an Internet
session
Proceed as follows to start an Internet session:
1
Open a Web browser on your computer and browse to the SpeedTouch™ Web
pages (see
“1.2.1 Access via the Web Interface” on page 7
for more
information).
The SpeedTouch™ home page appears by default.
2
Click Connect at the appropriate broadband connection.
The SpeedTouch™ embedded PPP dial-in client establishes the Internet
connection.
3
Browse the Web.
Monitoring your
Internet connection
You can view and monitor your connection to the Internet as long as the session is
running via:
The SpeedTouch™ System Information page: see
.
The SpeedTouch™ Diagnostics task: see
.
You might be requested to enter your user name and password.