2 access via cli, Access via cli, 2 access via – Technicolor - Thomson SpeedTouch 585 User Manual

Page 16: Chapter 1

Text mode
Original mode

E-DOC-CTC-20051017-0147 v2.0

Chapter 1

Getting to know your SpeedTouch™

1.2.2 Access via CLI

To access the

SpeedTouch™ via the

Command Line

Interface (CLI)

You can access the Command Line Interface (CLI) via:

A Telnet session

This requires a TCP/IP connection between the host from which the Telnet
session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected computer must have an IP address in the same subnet.

Quote site commands (over FTP)

For more information, see

“ Quote site command” on page 12

For more information on CLI commands, see the SpeedTouch™ CLI Reference
Guide.