To start a telnet session, Chapter 1 – Technicolor - Thomson SpeedTouch 585 User Manual
Page 17
9
E-DOC-CTC-20051017-0147 v2.0
Chapter 1
Getting to know your SpeedTouch™
To start a Telnet
session
Proceed as follows:
1
Open a telnet application.
2
Connect to your SpeedTouch™.
3
Enter your SpeedTouch™ security user name and password.
As soon as you have opened a session to the CLI, the SpeedTouch™ banner is
displayed, followed by the CLI prompt, as shown in the example below.
You can use the Command Prompt window.
In Microsoft Windows XP for instance:
1
On the Windows taskbar, click Start.
2
Select (All) Programs > Accessories > Command Prompt
.
In the Command Prompt window:
At the prompt, type
telnet
followed by the IP address of your
SpeedTouch™ (192.168.1.254 by default).
The default user is ‘Administrator’ and the default password is blank.
Username : Administrator
-----------------------------------------------------------------------
-
*
______
SpeedTouch
*
___/_____/\
*
/
/\\
Version X.X
*
_____/__
/
\\
*
_/
/\_____/___ \
Copyright (c) 1999-2005,
*
//
/
\
/\ \
THOMSON
*
_______//_______/
\
/ _\/______
*
/
/ \
\
/
/ /
/\
*
__/
/
\
\
/
/ /
/ _\__
*
/ /
/
\_______\/
/ /
/ /
/\
* /_/______/___________________/ /________/ /___/
\
* \ \
\
___________
\ \
\ \
\
/
*
\_\
\
/
/\
\ \
\ \___\/
*
\
\/
/
\
\ \
\
/
*
\_____/
/
\
\ \________\/
*
/__________/
\
\
/
*
\
_____
\
/_____\/
*
\ /
/\
\
/___\/
*
/____/
\
\
/
*
\
\
/___\/
*
\____\/
-----------------------------------------------------------------------
{Administrator}=>