Quantum Audio Tape Library PX502 - Manual (Page 8)

PX502 Tape Library Quick Start Guide
8
Figure 8 Installing the Rack
Mount Shelves
3 Once the rack mount shelves are secured to the rack,
tighten the Allen screws securing the adjustable shelves
(right and left) together (see
figure 9 ).
Left shelf
Right shelf
Mounting
plate
M4 x 12
Allen screws
Figure 9 Tightening the Rack
Mount Shelves
Installing the Library Chassis 0
1 The back mounting brackets are lettered (A through I)
so the correct mounting position is easily determined.
The mounting positions differ depending on the depth
of the rack (see
table 4 ).
W ARNING : The PX502 tape library weighs approximately
52 lbs (23.6 kg). At least two people are
required to lift and install the library.
N OTE : If the depth of the rack is less than 27 in, do not
install the back mounting brackets or clamps.
Tighten screws to secure
both rack mounting rails