Qualcomm GSP-1600 - Manual (Page 65)

System Menu
57
5. Scroll to select one of the following:
■ GStar Only – Look for Globalstar satellite service only. Press
ok , and the phone returns to standby mode.
■ Cell Only – Look for cellular service only. Press ok , and the
Cell Pref menu displays. Go to Step 6.
■ GStar Pref – Look for Globalstar satellite service first and either
digital or analog mode last. Press
ok , and the Cell Pref menu
displays. Go to Step 6.
■ Cell Pref – Look for cellular service first and Globalstar last. Press
ok , and the Cell Pref menu displays. Go to Step 6.
6. If the Cell Pref menu displays, scroll to select one of the following:
■ Analg Only – Prefer analog service only
■ Digtl Only – Prefer digital service only
■ Digtl Pref – Prefer digital service over analog
■ Analg Pref – Prefer analog service over digital
7. Press ok .
NAM Select
The phone allows one Globalstar NAM (number assignment module), or
phone number, and two different cellular-only NAMs. The NAMs are
entered into the phone by your service providers. (See My Numbers,
page 58, to display the NAMs entered.)
Before making or receiving calls, you must activate a NAM, but only one
can be active at a time. With this feature, you can access these options:
■ Auto NAM – Automatically switches NAMs, if appropriate, during
system searches to look for home area service.
■ Set NAM – Manually sets the NAM.
■ Set System – Sets your system preference for each NAM. Set System
only affects cellular service. It does not affect Globalstar service.
Your service provider can configure the Globalstar NAM for both Globalstar
and cellular service (digital and analog). In Globalstar mode, the phone
always uses the Globalstar NAM. In cellular mode, the phone uses the
selected cellular NAM (NAM1, NAM2, or G*NAM).
To set Auto NAM
1. From standby mode, press menu .
2. Press for System.
3. Press for NAM Select.
4. Press for Auto NAM.
5. Scroll to select “yes” or “no.”
6. Press ok .