Configuring the bridge – Quantum 890 USE 155 User Manual
Page 29
29
Configuring the Bridge
H
Before You Start
H
Connecting by the RS–232 Port
H
Connecting by Telnet (IP Address Not Assigned)
H
Connecting by Telnet (IP Address Assigned)
H
Using the Configuration Menu
H
Option 1: Network/IP Settings
H
Option 2: Serial and Mode Settings
H
Option 3: Modem Control Settings
H
Option 4: Advanced Modbus Protocol Settings
H
Option 5: Unit_ID to IP Address Mapping Table
3