Quatech QSP-200/300 - Manual (Page 10)

2. Insert the QSP-200/300 into any available PC Card socket.
Windows 2000 will automatically install the driver for this device.
2.1.1 Installing QSP-200/300 Under Windows NT
To allow easy configuration of the QSP-200/300 the Quatech Device Manager for Windows NT
has been written for the hardware. This configuration utility supports the QSP-200/300 only in
block addressing mode.
To begin the installation, open Windows Explorer and search for the ‘Setup.exe’ command to
install the Quatech Device Manager. (D:\Serial Port
Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA). Once the installation is complete an
icon will be placed on the desktop.
Windows NT Exporer
1. Locate and double click the Quatech Device Manager icon on the desktop.
Device Manager Icon on Desktop
QSP-200/300 User's Manual 4