Olympus LS-7 - Manual (Page 56)

56
4
EN
Menu setting method
Menu setting method
Plug-inPower
External microphones which are supported
by plug in power can also be used.
Whether or not to supply power to external
microphones can be configured.
[On]: When the plug-in power function
is activated, power will be supplied to
the connected external microphone.
Select this when external microphones
supported by plug-in power are
connected (
☞ P.35).
[Off]: Disables this function. Select
this when external microphones
not supported by plug-in power are
connected.
• Turn the plug-in power function to
[Off] when an external microphone
not supported by plug-in power is
connected, as there is the risk that noise
may be generated while recording.
• Phantom power cannot be supplied, even
when the plug in power function is set to
[On].
Pre-Recording
Pre-recording enables you to start recording
up to 2 seconds* before you press the
button for recording. This function allows
you, for example, to start a recording bird’s
singing up to 2 seconds* before its start
even if you press the recording button at the
moment it starts singing.
[On]: For recording sound continuously from
up to 2 seconds* before the recording
button is pressed.
[Off]: For normal recording start.
How to enable pre-recording:
To enable pre-recording, set
[Pre-Recording] to [On].
1 While the recorder is during
recording mode, press the
REC (
s) button.
• The recorder enters recording
pause mode. However, recording
is performed continuously, and
recorded data for up to 2 seconds*
will be refreshed every second.
2 Press the REC (
s) button.
• Recording pause will be released and
recording will start. The recorded
data will include those from up to 2
seconds* before the REC (
s) button
was pressed.
* Recording start time will vary
according to [Rec Mode] settings.
• When using the [Pre-Recording]
function, the following functions are not
available.
• [VCVA] (
☞ P.53)
• [V-Sync. Rec] (
☞ P.54)