Olympus LS-7 - Manual (Page 32)

2
32
EN
Recording
R
e
cording
Settings relating to Recording
[Mic Select]
(
☞ P.50)
Select whether or not the
built-in center microphone is
to be turned On or Off.
[Mic Sense]
(
☞ P.50)
Sets the recording sensitivity.
[Rec Mode]
(
☞ P.51)
Sets the recording rate for
each recording format.
[Rec Level]
(
☞ P.51)
You can configure whether
to adjust the recording level
automatically or to adjust it
manually.
[Zoom Mic]
(
☞ P.52)
Sets the directivity of the
builtin stereo microphone.
[Low Cut Filter]
(
☞ P.52)
This function can reduce
noise from air conditioners,
projectors and other similar
noises.
[VCVA]
(
☞ P.53)
Sets the threshold level for
the Variable Control Voice
Actuator (VCVA).
[V-Sync. Rec]
(
☞ P.54)
Sets the start level for voice
sync recording.
[Timer Rec]
(
☞ P.67)
Sets timer recording.
[Rec Scene]
(
☞ P.55)
Sets the recording settings
which matches the recording
condition or environment.
[Rec Monitor]
(
☞ P.55)
Select whether or not to
output the recording monitor
sound from the EAR jack.
[Plug-inPower]
(
☞ P.56)
Select whether or not to use
the plug-in power function
according to the external
microphone connected to
the MIC jack.
[Pre-Recording]
(
☞ P.56)
Pre-recording enables you
to start recording up to 2
seconds before you press the
button for recording.
• [
•] will appear on the display.
• Recording will stop, and the file that was
just recorded will be played back.
Pause
While the recorder is during
recording mode, press the REC (
s)
button.
• [
≠] will appear on the display.
• The recorder will time out after 120
minutes when left in [Rec Pause].
Resume Recording:
Press the REC (
s) button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the
`OK
button.