3 changing between remote a, 4 using commands – Omega PCL340 User Manual
Page 26
22
Setup 2: The upper display is set to [EXT] mode and the middle is
set to mA, lower is off.
Setup 3: The upper display is set to [P1] mode and the middle is set
to [VOLTS] mode, lower is off.
Setup 4: The upper display is set to [P1], the lower display is set to
[EXT].
Setup 5: The upper display is set to [P1], and the lower display is set
to mA Loop.
This manual is related to the following products: