Onkyo R-801A - Manual (Page 31)

31
Receiving stations
1
Select FM or AM using the INPUT but-
ton or the FM or AM button on the
remote controller.
2
Use the √TUNING® ( / ) con-
trol to change the frequency.
The indoor antenna should be installed on a
wall or other surface in the position which
gives the best reception. For more informa-
tion on how to install the antenna, refer to
page 17, 19.
Display Options:
When you are listening to radio broadcasts,
the display usually shows the radio fre-
quency of the selected station. You can,
however, change to the current time or char-
acter information for the selected station. To
do so, press the DISPLAY button repeatedly
until the desired indication appears.
For more information on how to enter char-
acter information, see “Naming a preset sta-
tion” on page 34.
This function enables you to store the fre-
quencies into memory automatically, with-
out having to go through and store each
frequency manually.
1
In FM mode, hold down the MEMORY
button for a few seconds. The “MEM”
(MEMORY) indicator appears on the
display and “AUTO” will start flashing
on the display. Keep holding down
the button for a few more seconds to
start the Auto Memory function.
The frequencies are scanned from low to
high. Up to 20 FM stations with the best sig-
nal quality are selected, sorted in order from
low to high frequency, and stored into the
preset memory.
Note
All stations previously stored in memory will
be replaced with new Auto Memory stations.
You can store your favorite stations in the
preset memory. Follow the procedure below:
1
Select FM or AM using the INPUT but-
ton, or FM or AM button on the
remote controller.
DISPLAY
R- 8 01A
STANDBY / ON STANDBY INPUT
ACOUSTIC PRESENCE
TUNING MEMORY FM MODE
CLEAR PHONES
TUNER AMPLIFIER
VOLUME
DISPLAY
INPUT MEMORY
√ TUNING®
( , )
REPEAT
STANDBY/ ON
TAPE
TAPE REW TAPE FF
SLEEP TIMER ENTER CLOCK
MODE
CLEAR
SCROLL
CDR/PC
CD/ DVD MD FM AM
ACOUSTIC PRESENCE
INPUT SELECTOR
TAPE
CDR/PC
CD/DVD
MD
VOLUME
MUTING
7 8
9 10/0
4
5 6
2 3 1
--/---
UP
DOWN
FM
AM
,
Tuning the radio
FM AM
INPUT
or
Remote controller
TUNING
Remote controller
Using Auto Memory (FM only)
Presetting your favorite stations
Hold down
MEMORY
FM AM
INPUT
or
Remote controller