Loading batteries – Olympus AZ-4 Zoom User Manual

Page 5

Loading Batteries

Do not use incorrect batteries or mix new and old batteries at the same time.

Before replacing batteries, set the power switch to OFF.
Please remove the batteries from your camera during long periods in which the

camera is not in use.

Turn the lock screw on the bottom of the

grip with a coin as shown to remove the

battery case lid.

Insert the batteries correctly as shown and

replace the lid using a coin to turn the screw.

Use two 3V Lithium batteries (Panasonic
CR-123A or Duracell DL-123A batteries.)
* Try to avoid changing batteries while the

film is still in the camera. (With the

batteries removed the film counter

indicator will remain active for

approximately 30 minutes.)