Onkyo DV-S717 - Manual (Page 17)

Basic Pla
ybac
k
17
To stop playback
Press STOP.
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
To remove the disc
Press OPEN/CLOSE.
• Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a
normal broadcast may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these
discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on your TV when
viewing DVD video discs.
About DVD VCD CD
The DVD VCD CD icons on the heading bar show the playable
discs for the function described under that heading.
: You can use this function with DVD video discs
: You can use this function with VIDEO CDs
: You can use this function with audio CDs
DVD
CD
To start playback from the menu screen
1 Press / / / or the number
buttons to select the title you want.
2 Press ENTER.
The DVD player starts playback from
the selected title.
• When not using the menu screen of
a PBC-controllable VIDEO CD, set
“PBC” to “Off” via the on-screen
displays. 32 44
Remove the disc after the disc tray
opens completely.
REMOTE CONTROLLER
3 2 1
6 5 4
9 8 7
0 10 +
1
2
4
PAUSE
STOP
MENU
TITLE
CINEMA SCAN ENTER
RETURN
PAUSE STO
OPEN /CLOSE
DVD PLA
• Do not move the DVD player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button on the remote controller or DVD player to open and close the disc tray. Do not push the disc tray
while it is moving. Doing so may cause the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on
your remote controller once the movie is completed.
• If you pause a picture and leave it still for a long while, the screen saver of the DVD player automatically appears (when “Screen
Saver” is set to “On” 41 ). To turn off the screen saver, press the PLAY button.
About This Instruction Manual
This Instruction manual explains the basic instructions of this DVD player. Some DVD video discs are produced in a manner that
allows specific or limited operation during playback. As such, the DVD player may not respond to all operating commands. This is
not a defect in the DVD player. Refer to the instruction notes of discs.
“ ” may appear on the TV screen during operation. A “ ” means that the operation is not permitted by the DVD player or the disc.
TITLE 4 TITLE 3
2 TITLE 1 TITLE
e.g.
Notes:
/ / /
ENTER
ENTER
ENTER
STOP
OPEN /
CLOSE
VCD
DVD VCD CD
PAUSE