Onkyo DV-S717 - Manual (Page 14)

14
VIDEO OUT
S VIDEO VIDEO
R
L
ANALOG
OUTPUT DIGITAL
OUTPUT REMOTE CONTROL
COAXIAL OPTICAL
Y CB CR
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
For connection to your TV, see pages 12 and 13.
Select the connection type depending on your audio equipment.
Connecting to Optional Equipment
Dolby Digital
Dolby Digital is the surround sound technology used in theaters
showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture
and live concert DVD video discs with this dynamic realistic sound
by connecting the DVD player to a 6 channel amplifier equipped
with a Dolby Digital decoder or Dolby Digital processor. If you
have a Dolby Pro Logic Surround decoder, you will obtain the
full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles
with the Dolby Surround mark.
Connecting to an Amplifier Equipped With a Dolby Digital Decoder
• Use DVD video discs encoded via the Dolby Digital
recording system.
• Make the following setting
Setting Select: Page
Audio Out Select Bitstream 38
Recording system j 29
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic
Surround by connecting an amplifier and
speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in
“Connecting to an Amplifier equipped with a Dolby Digital
Decoder.” Refer to that amplifier’s owner’s manual and set the
amplifier so you can enjoy Dolby Pro Logic Surround sound.
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Connecting to an Amplifier Equipped With a Dolby Pro Logic Surround
TV
Signal flow
Connection
example
To audio input
Front
speaker
(right) Front
speaker
(left)
Audio cable
Amplifier equipped with
Dolby Pro Logic surround
Rear speaker
• Make the following setting
Setting Select: Page
Audio Out Select Analog 2ch 38
Connect one or two rear speakers.
The output sound from the rear speakers will be monaural even if you connect two
rear speakers.
VIDEO OUT
S VIDEO VIDEO
R
L
ANALOG
OUTPUT DIGITAL
OUTPUT REMOTE CONTROL
COAXIAL OPTICAL
Y CB CR
TV
Signal flow
Connection
example To COAXIAL type
digital audio input
Front
speaker
(right) Front
speaker
(left)
75 Ω
coaxial
cable
Optical digital cable
Amplifier equipped with
a Dolby Digital decoder
Rear speaker
(left surround) Rear speaker
(right surround)
Sub
woofer
To OPTICAL type digital audio
input
When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly. When not using
the jack, keep it capped to protect it from dust intrusion.
Note:
•
Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy
sounds of Dolby Pro Logic Surround using this connection.
Center speaker
Center speaker