One for All URC-7010 - Manual (Page 7)

The Search Method
If your television does not respond to the ONE FOR ALL 1 after you have
tried all the codes listed for your brand, try searching for your code. The
Search Method allows you to find the code for your device by scanning
through all the codes contained in the memory of the ONE FOR ALL 1. The
search method may also work if your brand is not listed at all.
To search for your television code:
1 Switch your television on (not in standby) and aim your
ONE FOR ALL 1 at your device.
2 Press and hold down MAGIC until the ONE FOR ALL 1 red
light blinks twice (the red light will blink once then twice).
3 Press 9 9 1. The red light will blink twice.
4 Now slowly, alternate between POWER and CHANNEL
DOWN, over and over, until your television turns off. You
may have to press these keys many times (up to 200
times!), so please be patient. Remember to keep pointing
the ONE FOR ALL 1 at your television when you press
these keys.
5 As soon as your television turns off, press MAGIC to store
the code.
The ONE FOR ALL remote should now be ready to operate your TV. Turn
your TV back on and try all the remote’s functions to ensure they are
working properly. If some of the ONE FOR ALL 1’s commands are not
operating correctly, try the search method again. You may be using the
wrong code.
W W W.ONEFORALL.COM
7
9 9 1
MAGIC
MAGIC