One for All URC-7010 - Manual (Page 6)

6
W W W.ONEFORALL.COM
Setting Up Your Television
1 Make sure your television you wish to operate is
switched on (not in standby).
2 Find the code for your device in the Code List (page
73 - 77). The device codes are listed per brand name. Also
the most popular code for each brand is listed first.
3 Press and hold down MAGIC until the red light blinks
twice (the red light will blink once then twice).
4 Enter your four-digit device code using the number
keys. The red light will blink twice.
5 Now aim the ONE FOR ALL 1 remote at your device
(television) and press POWER. If your device switched
off, the ONE FOR ALL 1 is ready to operate your device.
6 Turn your television back on and try all the remote’s func-
tions to ensure they are working properly. If the functions
do not work properly, repeat steps 1-5 using another code
listed under your brand.
7 If your television does not respond to the code
entered, follow steps 1-5 with each code listed for
your brand. If none of the codes listed for your
brand operate your television, or if your brand is
not listed at all, try the search method described on
page 7.
8 Write your devicecode in the applicable four digit
boxes provided in the battery compartment and on
page 8 for future reference.
Installation
Before you start, please read these instructions carefully
Important note:
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
ONE FOR A
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0009
0087, 0
093, 0 363, 0 41
0217, 0
216
0264
0516
0087
0216, 0
009, 0
037, 0
0037, 0
274
0361, 0
208, 0 371
_ _ _ _
6
W W W.ONEFORALL.COM
MAGIC