Odyssey Electronics Building Set - Manual (Page 4)

Transformer operations
T o select a single operational state for
your Lionel locomotive (example: for-
ward only), you can deactivate the R2IR’s
sequencing function with the Program/Run
switch, located on the right hand side, under
the locomotive’s cab.
Get your locomotive moving in the desired
direction, then slow it down without stop-
ping. Set the Program/Run switch to PROG.
The locomotive is now “locked” into your
chosen direction.
When you no longer want single-direction
operation, just slide the Program/Run switch
back to RUN.
Locking your locomotive into a single operational state
Program/Run Switch
Smoke Unit Switch
(see page 18 for details)
4
Rear