Oregon Scientific RM998PA - Manual (Page 8)

7
EN
BACKLIGHT
Press SNOOZE / LIGHT to activate the backlight for 8
seconds.
TEMPERATURE
The clock displays the current indoor temperature. To choose
between
° C / ° F, press the ° C / ° F button to select the setting
you want.
ALARM
ALARM DISPLAY AND SOUND
This product has two daily alarms that can be set to go off
at the same time every day. You can choose to be woken
up by a melody, beeping or talking alarm sound and / or
vibration. See the table below for the alarm sound icon and
its meaning:
ICON MEANING
Talking alarm is set
Melody alarm is set. (There are 5 melodies
and 1 beep alarm to choose from)
Vibration alarm is set
Talking and vibration alarms are set
Melody and vibration alarms are set
No icons No alarm is set
SET THE ALARM(S)
1. Press and hold ALARM for 2 seconds.
2. Alarm 1 will start flashing. Use or to toggle
between alarm 1 and 2.
3. Press ALARM to select alarm 1 or 2. The hour will start
flashing.
4. Press or to change the setting.
5. Press ALARM to confirm the setting and move onto the
next one.
6. The settings appear in the following order: Hour, minute,
alarm type, alarm sound and alarm volume (if melody
alarm has been selected).
7. The daily alarm is automatically turned on after setting.
ACTIVATE / DEACTIVATE THE ALARM(S)
• Press the ALARM button to toggle between alarm 1 and
alarm 2 ON / OFF.
• When the alarm sound icons appear on the display the
alarm is activated. When the icons do not appear the
alarm is deactivated.
RM998PAmanual-E 05/1/20, 3:33 PM 7